Top apron was repainted, however
lower apron and ball shooter were in bad condition ( scratched and rusty ).
Unfortunately I was unable to locate another apron, I rubbed back apron and
shooter and applied 1 coat metal primer, 2 coats of undercoat , 2 coats of
acrylic white and then applied the Waterslide Decals,
This full process can be found at
Applying Water
Slide Decals at my
Tips and Information
page.
Ball Shooter and Apron BEFOREBall Shooter and Apron AFTER
CABINET , BACK BOX and COIN DOOR
First task was to start at the cabinet /
back box and coin door - Removed coin door & Ball shooter, Stripped old paint
off cabinet and back box, fortunately the original art was visible, so I was
able to trace the artwork, all dents and cracks were filled , applied
2 coats of undercoat , 2 coats of water based enamel ( All these coatings
were applied by a small paint roller - This full process can be found at
CabinetPainting with a Roller
at my Tips and Informationpage.
Coin Door and Ball Shooter
surround were stripped of paint and applied 1 coat spray metal primer, 1 coat of
spray undercoat and 2 coats of Hammertone paint.
As you can see in the pictures,
quite happy with the final result compared to how it looked before.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
